Fabtech 0'' Lift Kit for 2010-2023 Toyota 4Runner

K7082DL Fabtech Lift Kit Suspension
For [3.0] '' Lift
[Full Front and Rear]
Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Front Dirt Logic 2.5 Remote Reservior Coil Over Shock Absorber And Rear Dirt Logic 2.25 Reservior Shock Absorbers; With Uniball Upper Control Arms/ Rear Coil Springs/ Installation Hardware
Attributes Front Lift Amount (IN): 3 Inch Rear Lift Amount (IN): 3 Inch Front Lift Type: Coil Over Shock Absorber Rear Lift Type: Coil Spring Maximum Tire Size: 33 x 12.50 Shock Type: Hydraulic/ Nitrogen Gas Charged Wheel Backspacing (IN): 4.625 Minimum Wheel Diameter: 17 Wheel Offset (MM): 3.175 Shocks: With Shocks In Kit Color: Black Components/ Silver Shock Absorbers Obtain increased wheel travel with a mild lift height with this heavy-duty Upper Control Arm system. The tubular Upper Control Arms feature 1-1/4 Inch Outer Diameter, 0.120 Inch wall thick chromoly tube construction with 1 Inch diameter Stainless Steel Uniballs that attach to the factory spindle without drilling. The replacement UCA's have been designed to work in conjunction with Fabtech's Stainless Steel Dirt Logic 2.5 Coilover shocks providing 10 Inch of wheel travel for a complete front suspension system upgrade. The Dirt Logic 2.5 Coilovers feature cold wound coil springs for a smooth ride with the ability to tackle aggressive offroad terrain. Fabtech rear Dual Rate coil springs replace the factory springs with a two stage design. In the first stage they provide a supple ride quality at lower speeds with the ability to allow for more wheel travel when traversing large offroad obstacles. The second stage provides increased spring rate for load carrying capacity of gear while providing a superior ride at higher speeds. The rear Dirt Logic 2.25 shocks will also provide 9 Inch of travel due the remote reservoir allowing for the full stroke of the shock. This system is perfect for those that want increased suspension performance with a low lift height. A great choice for daily drivers that overland and hit the trails on weekends. Features & Benefits Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle Dual Rate Rear Coil Springs Provide Increased Flexibity And Smooth Ride Great System For The Daily Driver That Requires Increased Offroad Performance Limited Lifetime Warranty

https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT82055i.pdf https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT26096i.pdf https://vehiclepartimages.com/PMDT/FAB/InstallationInstructions/FT801392i.pdf
[Front Lift Amount (IN): 3 Inch, Rear Lift Amount (IN): 3 Inch, Front Lift Type: Coil Over Shock Absorber, Rear Lift Type: Coil Spring, Maximum Tire Size: 33 x 12.50, Shock Type: Hydraulic/ Nitrogen Gas Charged, Wheel Backspacing (IN): 4.625, Minimum Wheel Diameter: 17, Wheel Offset (MM): 3.175, Shocks: With Shocks In Kit, Color: Black Components/ Silver Shock Absorbers]

Kit components:
{Fabtech Motorsports FTS26085 (F37 FTS26085); Quantity Required: 1; Lift Kit Component; Component For K7069DL/ K7070DL/ K7071DL/ K7072DL}
, {Fabtech Motorsports FTS26097 (F37 FTS26097); Quantity Required: 1; Lift Kit Component; Component For Fabtech K7081DL Lift Kit; Uniball Control Arms}
, {Fabtech Motorsports FTS26099 (F37 FTS26099); Quantity Required: 1; Lift Kit Component; Component For Fabtech K7080DL Lift Kit; Dirt Logic 2.5 Resi Coilover Shock Absorber}
, {Fabtech Motorsports FTS801392 (F37 FTS801392); Quantity Required: 2; Lift Kit Component; Component For K7069DL/ K7070DL/ K7071DL/ K7072DL/ K7079DL}